R 1EFF : 001-049, 101-105, 1 52-35-13Page 408 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
TASK 52-35-13-000-002
Removal of the Proximity Switches 5MJ and/or 12MJ
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific access platform 2.10 m (6 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
52-35-13-991-002-A Fig. 402 R **ON A/C 051-052,
R 52-35-13-991-002 Fig. 402A
1EFF : ALL 1 52-35-13Page 409 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
Subtask 52-35-13-010-053
A. Get Access
(1) Put the access platform in position below the FWD or AFT cargo-compartment door (referred to as cargo door).
(2) Remove the access panel 825AR or 826AR from the closed cargo door. Subtask 52-35-13-865-052
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU DOORS/CARGO 1MJ T12
4. Procedure
_________
Subtask 52-35-13-020-052
A. Removal of the Proximity Switch 5MJ or 12MJ R **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
(Ref. Fig. 402/TASK 52-35-13-991-002-A) R **ON A/C 051-052,
R (Ref. Fig. 402A/TASK 52-35-13-991-002)
1EFF : ALL 1 52-35-13Page 410 1 1 May 01/05 1 1 1CES 1
R Proximity Switch Figure 402/TASK 52-35-13-991-002-A
1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-35-13Page 411 1301-399, 1Aug 01/05 1 1 1CES 1
R Proximity Switch
Figure 402A/TASK 52-35-13-991-002
1EFF : 051-052, 1 52-35-13 Page 412
1 1 Aug 01/05
1 1
1CES 1
**ON A/C ALL
(1)
Remove the proximity sensor from the cargo door structure as follows:
(a)
Disconnect the electrical connector (1) from the proximity sensor (3).
(b)
Put blanking caps on the disconnected electrical connector (1) and on the receptacle of the proximity sensor (3).
(c)
Remove the screws (2) and the proximity sensor (3) from the bracket (4).
(2)
Remove the target from the control lever of the locking shaft as follows:
(a)
Remove the nuts (9) and the washers (8) from the control lever (6).
(b)
Remove the bolts (5) and the target (7) from the control lever (6).
1EFF : ALL 1 52-35-13Page 413 1 1 May 01/05R 1 1 1CES 1
TASK 52-35-13-400-002
Installation of the Proximity Switches 5MJ and 12MJ
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.10 m (6 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-35-00-720-001 Functional Test of the Proximity Switch 5MJ (12MJ)
R **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
52-35-13-991-002-A Fig. 402 R **ON A/C 051-052,
R 52-35-13-991-002 Fig. 402A
1EFF : ALL 1 52-35-13Page 414 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
Subtask 52-35-13-865-056
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(96)
