(2)
Put the access platform in position below opened the cargo door.
(3)
Remove the access panels 826AR, 826BR and 826CR from the cargo door.
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C406 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-32-21-865-083
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
4. Procedure
_________
Subtask 52-32-21-020-070
A. Removal of the Latching Units
**ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
(Ref. Fig. 418/TASK 52-32-21-991-018) R **ON A/C 151-199, 401-499,
(Ref. Fig. 418A/TASK 52-32-21-991-018-A) R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
(1)
Move the latching units of the opened cargo door to the latched position as follows:
(a)
Press the roller lever of the interlock mechanism outboard to release the blockage of the latching shaft.
(b)
Move the latching handle to the locked position and push it into the recess of the door structure.
(2)
Remove the nut (202), the washer (201) and thetravel limit bolt (217) from the cargo door frame.
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C407 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Latching Unit
Figure 418/TASK 52-32-21-991-018- 12 (SHEET 1)
1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-32-21Page C408 1301-399, 1Aug 01/05 1 1 1CES 1
Latching Unit
Figure 418/TASK 52-32-21-991-018- 22 (SHEET 2)
1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-32-21Page C409 1301-399, 1Aug 01/05 1 1 1CES 1
Latching Unit
Figure 418A/TASK 52-32-21-991-018-A12 (SHEET 1)
1EFF : 151-199, 401-499, 1 52-32-21Page C410 1 1 Aug 01/05 1 1 1CES 1
Latching Unit
Figure 418A/TASK 52-32-21-991-018-A22 (SHEET 2)
1EFF : 151-199, 401-499, 1 52-32-21Page C411 1 1 Aug 01/05 1 1 1CES 1
(3)
Disconnect the latching hook (210) from the cargo door frame as follows:
(a)
Remove and discard the cotter pin (206) from the nut (207).
(b)
Remove the nut (207), the washers (208) and the latching hook bolt (212) from the door frame and let the latching hook (210) hang down.
(4)
Disconnect the bellcrank (215) from the cargo door frame as follows:
(a)
Remove and discard the cotter pin (203) from the nut (204).
(b)
Remove the nut (204), the washers (205) and the bolt (213) from the door frame.
(5)
Disconnect the bellcrank rod (181) from the link lever (175) as follows:
(a)
Remove and discard the cotter pin (172) from the nut (173).
(b)
Remove the nut (173), the washers (179), the bushes (182) and 180) and the bolt (178) from the link lever (175).
(6)
Remove the latching unit from the cargo door.
(7)
If necessary, remove the bushes (209) and (216) from the cargo door frame.
(8) If necessary, remove the sleeve (211) from the latching hook (210). Subtask 52-32-21-020-071
B. Disassembly of the Latching Unit
(1) Disconnect the latching hook (210) from the bellcrank lever (234) as follows:
(a)
Remove and discard the cotter pin (225) from the nut (226).
(b)
Remove the nut (226), the washers (227) and the bolt (231) from the lower fork-end of the bellcrank lever (234).
(c)
Remove latching hook (210) from the bellcrank lever (234).
(d)
Remove the bushes (228) and (230) from the lower fork end of the linkage (234).
1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page C412 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(e) Remove the sleeve (229) from the latching hook (210).
(2)
Disconnect the bellcrank (215) from the link rod (181) as follows:
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(6)
