(3)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (4)
 Install the insulation packs in the work area and the lining on the Bulk door (Ref. TASK 52-33-13-400-001).

 (5)
 Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).

 (6)
 Remove the access platform(s).

 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-21Page 444 1224-224, 228-228, 1May 01/05 1 1 1CES 1 LATCH AND STOP FITTINGS - REMOVAL/INSTALLATION

______________________________________________
 TASK 52-33-31-000-001
 Removal of the Latch and the Stop Fitting
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific access platform 2.3 m (7 ft. 7 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump 52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-010 Open the Deactivated Bulk Cargo-Compartment Door 52-33-13-000-001 Removal of the Lining and Insulation of the Bulk
 Cargo-Compartment Door
R **ON A/C 001-003, 051-054,
 52-33-31-991-001 Fig. 401 R **ON A/C 004-049, 055-099, 101-149, 221-221, 224-224, 228-228,
 52-33-31-991-001-A Fig. 401A
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 401 1224-224, 228-228, 1May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,

 3. Job Set-up
__________ R **ON A/C 001-049, 051-099, 101-105,
 Subtask 52-33-31-010-050
 A. Get Access
 (1)
 Open the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001).

 (2)
 Put the access platform in position below the Bulk cargo-compartment door (referred to as Bulk door).

 (3)
 Remove the lining and insulation of the BULK door (Ref. TASK 52-33-13-000-001).

 (4) Open the Bulk door (Ref. TASK 52-30-00-860-006). R **ON A/C 106-149, 221-221, 224-224, 228-228,
 Subtask 52-33-31-010-050-A
 A. Get Access
 (1)
 Open the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001).

 (2)
 Put the access platform in position below the Bulk cargo-compartment door (referred to as Bulk door).

 (3)
 Remove the lining and insulation of the BULK door (Ref. TASK 52-33-13-000-001).

 (4)
 Open the Bulk door (Ref. TASK 52-30-00-860-010).

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 402 1224-224, 228-228, 1May 01/05 1 1 1CES 1

R  **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
R  4. Procedure_________ **ON A/C 001-003, 051-054,
R  (Ref. Fig. 401/TASK 52-33-31-991-001) **ON A/C 004-049, 055-099, 101-149, 221-221, 224-224, 228-228,
R  (Ref. Fig. 401A/TASK 52-33-31-991-001-A) **ON A/C 001-003, 051-054,
 Subtask 52-33-31-020-050
 A. Removal of the Stop Fitting (1) Remove the fitting assembly (6) as follows: (a) Remove the nuts (2),(3) and the bolts (1),(4) to remove the fitting assembly from the bulk door structure. (b) Disconnect the fitting assembly (6) from the bulk door structure. (2) Remove the stop screw (5) as follows: (a) Release the lockpate (7) from the nut (8). (b) Remove the nut (8) and the lockplate (7) from the stop screw (5). (c) Discard the lockplate (7). (d) Remove the stop screw (5) from the fitting assembly (6). 

R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-31Page 403 1224-224, 228-228, 1May 01/05 1 1 1CES 1

 Latch and Stop Fittings
 Figure 401/TASK 52-33-31-991-001

R 1EFF : 001-003, 051-054, 1 52-33-31Page 404 1 1 May 01/05 1 1 1CES 1

 Latch and Stop Fitting
 Figure 401A/TASK 52-33-31-991-001-A

R 1EFF : 004-049, 055-099, 101-149, 221-221, 1 52-33-31Page 405 1224-224, 228-228, 1May 01/05 1 1 1CES 1R **ON A/C 004-049, 055-099, 101-149, 221-221, 224-224, 228-228,

 Subtask 52-33-31-020-050-A
 A. Removal of the Stop Fitting
 (1)
 Remove the nuts (2) and (3), the bolts (1) and (4) and disconnect the fitting assembly (7) from the bulk door structure.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(69)