Door Frame Fittings
Figure 401/TASK 52-33-32-991-001
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 403 1224-224, 228-228, 1May 01/05 1 1 1CES 1
(5)
Remove the protection cover (20) together with the plate (39) and the gasket (40) from the floor panel 162KF.
(6)
Remove the floor panels 162HF, 162GF, 162KF and 162LF (Ref. TASK 53-22-14-000-001).
(7)
If necessary, disengage the disc fasteners and the VELCRO tapes to remove the insulation mats adjacent the bulk door frame.
R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,
4. Procedure
_________
(Ref. Fig. 401/TASK 52-33-32-991-001)
Subtask 52-33-32-020-050
A. Removal of the Door Frame Fittings
(1)
Removel the stop fitting (2) as follows:
(a)
Remove the nuts (1), the bolts (4),(5) and the washers (3) from the stop fitting (2).
(b)
Carefully disconnect the stop fitting (2) from the bulk door frame.
(2)
Remove the forward latch spigot (18) as follows:
(a)
Remove the nuts (10),(11), the bolts (16),(15) and the washers (14),(17) from the forward latch spigot (18).
(b)
Remove the forward latch spigot (18) and the serrated plate (13) from the serrated plate (12).
NOTE : The serrated plate (12) is riveted on the bulk door frame.
____
(3) Remove the aft latch spigot (27) with the releted proximity switch 50WV as follows:
(a)
Make sure that the protection cover (20) of the proximity switch 50WV is removed.
(b)
Disconnect the connector of the cable loom (26) from the proximity sensor (25).
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 404 1224-224, 228-228, 1May 01/05 1 1 1CES 1
(c) Put blanking caps on the disconnected electrical connectors.
(4)
Remove the nuts (28),(29), the bolts (37),(33) and the washers (32),(38) from the aft latch spigot (27).
(5)
Remove the aft latch spigot (27) and the serrated plate (31) from the serrated plate (30).
NOTE : The serrated plate (30) is riveted on the bulk door frame.
____
(6) If necessary, disassemble the proximity switch 50WV from the aft latch spigot (27) as follows:
NOTE : The proximity switch 50WV includes the proximity sensor (25)
____
and the proximity target (36).
(a)
Disconnect the lockwire and remove the nut (24) and the safety washer (23) from the proximity sensor (25).
(b)
Remove the proximity sensor (25) from the bracket of the aft latch spigot (27).
(c)
Release the lock washer (34) from the nut (35).
(d)
Remove the nut (35) and the lock washer (34) from the proximity target (36).
(e)
Discard the lock washer (34).
(f)
Remove the proximity target (36) from the lever of the aft latch spigot (27).
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 405 1224-224, 228-228, 1May 01/05 1 1 1CES 1 TASK 52-33-32-400-001
Installation of the Door Frame Fittings
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______
ONLY WITH A GOOD SUPPLY OF AIR.
OBEY THE MANUFACTURERS INSTRUCTIONS.
PUT ON PROTECTIVE CLOTHING.
DO NOT GET THEM IN YOUR MOUTH.
DO NOT SMOKE.
DO NOT BREATHE THE GAS.
THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
-FLUSH IT AWAY WITH CLEAN WATER
-GET MEDICAL AID.
CAUTION : USE ONLY THE SPECIFIED MATERIALS AND OBEY THE INSTRUCTIONS FROM THE
_______
MANUFACTURERS. OTHER MATERIALS CAN CAUSE DAMAGE TO THE SURFACE
PROTECTION OF THE COMPONENTS AND THE RELATED AREA.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific wooden or plastic scraper
No specific access platform 2.3 m (7 ft. 7 in.) R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
R 1EFF : 001-049, 051-099, 101-149, 221-221, 1 52-33-32Page 406 1224-224, 228-228, 1May 01/05 1 1 1CES 1 B. Consumable Materials
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(73)
