曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  Subtask 53-51-00-110-067 
R  B. Preparation of the Inspection Area 
R  (1) Make sure that the surface of the inspection area is clean. 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.

 EFF : ALL
53-51-00Page 672
May 01/03

R  (2) If necessary, clean the inspection area with a lint-free cotton 
R  cloth, MISCELLANEOUS (Material No. 19-003) and the CLEANING AGENTS 
R  (Material No. 11-004). 
R  4. Procedure_________ 
R  (Ref. Fig. 618/TASK 53-51-00-991-020) 
R  Subtask 53-51-00-210-072 
R  A. Inspection Procedure 
R  (1) Do a general visual inspection of the fuselage internal structure 
R  between FR70 and FR77. Do this from the bottom center line to the 
R  crown center line, LH/RH: 
R  (a) Look for corrosion and damage to the surface protection. 
R  (2) If you find corrosion: 
R  (a) Refer to the ASRM (Ref. ASRM 51-22-00-001) for the general 
R  corrosion data. 
R  (b) Repair the corroded areas (Ref. TASK 51-74-11-300-001). 
R  (3) If you find damage to the surface protection: 
R  (a) Refer to the ASRM (Ref. ASRM 51-23-11-001) for the general data 
R  about the paint coating of the aircraft. 
R  (b) Repair the damage to the paint system (Ref. TASK 51-75-12-300-
R  001) or (Ref. TASK 51-75-12-300-003), as necessary. 
R  5. Close-up________ 
R  Subtask 53-51-00-410-074 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Close the access doors 312AR, 314AR. 
R  (3) Remove the warning notice(s). 
R  (4) Remove the access platform(s).

 EFF : ALL
53-51-00Page 673
May 01/03

R Inspection Areas of the Rear Fuselage, between FR70 and FR77 R Figure 618/TASK 53-51-00-991-020
 EFF : ALL
53-51-00Page 674
May 01/03 CES

R (5) Remove the ground support and maintenance equipment, the special and R standard tools and all other items.
 EFF : ALL
53-51-00Page 675

R  TASK 53-51-00-210-021 
R  General Visual Inspection of the Rear Fuselage External Surface, between FR70 
R  and FR87 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR._______ 
R  MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR 
R  DAMAGE. 
R  WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A_______ 
R  FALL CAN INJURE OR KILL YOU. 
R  1. Reason for the Job__________________ 
R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  1 ACCESS PLATFORM 8M (26 FT) - ADJUSTABLE 
R  No specific  1 WARNING NOTICE 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004  USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003  USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(116)