Nov 01/04
R
CES 3. Job Set-up
__________ Subtask 53-41-00-010-089
A. Get Access
(1)
Open the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001)
(2)
Put an access platform in position below the cargo door.
(3)
Remove the AFT cargo-compartment floor-panels 151DF and 151GF (Ref. TASK 53-42-14-000-001).
(4)
Remove the insulation blankets (Ref. TASK 25-80-00-000-001). NOTE : Identify the insulation blankets for installation.
____
4. Procedure
_________ (Ref. Fig. 611/TASK 53-41-00-991-015) Subtask 53-41-00-220-053
A. Inspection
(1) Do a nondestructive test on the internal parts of the lock fittings and the adjacent structure at the AFT cargo-compartment door (Ref. NTM 5341566).
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-46-11-101) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-41-00-410-090
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the AFT cargo-compartment floor-panels 151DF and 151GF (Ref. TASK 53-42-14-400-001).
(4)
Remove the access platform(s).
EFF : ALL 53-41-00Page C607
Nov 01/04
R
CES
(5)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(6)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL 53-41-00Page C608
Nov 01/04
R
CES TASK 53-41-00-220-007
Special Detailed Inspection of Internal Doubler Forward and AFT Water Service Panel Cutout between STGR38 and STGR42 LH
1. Reason for the Job
__________________
Refer to the MPD TASK: 534139-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific abrasive cloth, grade 280
No specific access platform 1.8 m (5 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only) ASRM 51-11-00-001 ASRM 51-22-00-001 ASRM 53-41-11-001 NTM 534139-Part.6 ASRM 51-73-00-001 (for corrective action) ASRM 51-74-00-001 (for corrective action)
EFF : ALL 53-41-00Page C609
Nov 01/04
R
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(58)
