(5)
Make sure that the work area is clean and clear of tool(s) and other items.
(6)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(7)
Remove the warning notice(s).
(8)
Close the AFT Cargo Compartment Door (Ref. TASK 52-30-00-860-004).
R **ON A/C 151-199, 401-499,
Subtask 53-41-00-410-157-A
A. Close Access
(1)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(2)
Install the linings (Ref. TASK 25-55-11-400-001), (Ref. TASK 25-55-12-400-001), (Ref. TASK 25-55-11-400-002), (Ref. TASK 25-55-11-400-003), (Ref. TASK 25-55-12-400-002) and (Ref. TASK 25-55-12-400-003).
(3)
If removed, install the ACT5 (Ref. TASK 28-11-27-400-006).
(4)
If removed, install the ACT1 (Ref. TASK 28-11-27-400-002).
(5)
If removed, install the ACT2 (Ref. TASK 28-11-27-400-003).
(6)
If removed, install the ACT3 (Ref. TASK 28-11-27-400-004).
(7)
Make sure that the work area is clean and clear of tool(s) and other items.
(8)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(9)
Remove the warning notice(s).
(10) Close the AFT Cargo Compartment Door (Ref. TASK 52-30-00-860-004).
**ON A/C 301-399,
TASK 53-41-00-210-826
General Visual Inspection of AFT Emergency Exit Skin Cutouts, Upper and Lower Corners, External Surface, LH/RH WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
EFF : 301-399, 53-41-00Page B682
Nov 01/04
R
CES
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00) Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 53-41-11-101 (for corrective action) ASRM 53-41-11-201 (for corrective action) 53-41-00-991-085 Fig. 657
3. Job Set-up
__________
Subtask 53-41-00-941-082
A. Install the ground support equipment.
(1)
Put a warning notice in position to tell persons not to operate the flight controls.
(2)
Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in the required position.
Subtask 53-41-00-110-109
B. Cleaning Procedure
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
EFF : 301-399, 53-41-00Page B683
Nov 01/04
R
CES
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(51)
