**ON A/C ALL
3. Job Set-up
__________
Subtask 53-49-21-860-050
A. Aircraft Maintenance Configuration
(1)
Make sure that the ACCESS PLATFORM 2M (6 FT) is in position at the AFT cargo-compartment door 826.
(2)
Make sure that the AFT cargo-compartment door 826 is open (Ref. TASK 52-30-00-860-001).
(3)
Make sure that the applicable floor panels in the AFT cargo-compartment are removed (Ref. TASK 53-42-14-000-001).
(4)
Make sure that the the insulation blankets are removed as necessary (Ref. TASK 25-80-00-000-001).
4. Procedure
_________
**ON A/C 001-049, 051-099, 101-149, 201-299,
(Ref. Fig. 401/TASK 53-49-21-991-001) R **ON A/C 151-199, 401-499,
(Ref. Fig. 401A/TASK 53-49-21-991-001-A)
**ON A/C 301-399,
(Ref. Fig. 401B/TASK 53-49-21-991-001-B)
EFF : ALL
53-49-21Page 410
**ON A/C ALL
Subtask 53-49-21-860-051
A. Preparation for Installation
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1)
Remove the remaining sealant with CLEANING AGENTS (Material No. 11-004), a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) and a SCRAPER - NON METALLIC from the strap (2), the valve retainer
(3) and the structure.
(2)
Make sure that the parts retained from the removed component are clean and in the correct condition.
(3)
Clean the component interface and/or the adjacent area.
(4)
Do an inspection of the component interface and/or the adjacent area.
Subtask 53-49-21-420-050
B. Installation of the Drain Valve
(1)
Put the valve retainer (3) and the strap (2) in the installation position.
(2)
Install the valve retainer (3) and the strap (2) with the pins (4) and the collars (1) (Ref. ASRM 51-42-11-001).
EFF : ALL
53-49-21Page 411
Aug 01/05
R
CES
(3) Install the drain valve (5) in the valve retainer (3). WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(4) Apply a bead of SEALANTS (Material No. 09-016) to the collars (1). NOTE : Do not apply sealants to the cutouts of the valve retainer
____
(3).
5. Close-up
________ Subtask 53-49-21-410-050
A. Put the aircraft back to the serviceable condition.
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2) 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(97)
