-
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 (1) Put the adjustable platform in position below the windows.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
 4. Procedure
_________
 Subtask 53-41-00-210-099
 A. Inspection
 (1) Examine the skin at the window cutouts for:
 -cracks,
 -corrosion,
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
 the correct repair procedure.

 EFF : 301-399, 53-41-00Page A636

Nov 01/04
R
 CES  5. Close-up

________ Subtask 53-41-00-410-128
 A. Close Access
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 EFF : 301-399, 53-41-00Page A637

Nov 01/04
R
 CES  TASK 53-41-00-210-048

 Detailed Visual Inspection of the Door Stop Fittings on FR47.2A and FR47.4, LH and RH
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 534190-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  lint-free cloth
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
R  Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
52-22-00-010-001  Opening of the Emergency Exit Doors from the
 Passenger Compartment

 52-22-00-410-001  Closing of the Emergency Exit Doors from the
 Passenger Compartment
 ASRM 53-46-11-101 (for corrective action)
 53-41-00-991-041 Fig. 631

 3. Job Set-up
__________
 Subtask 53-41-00-010-133
 A. Get Access
 (1) Open the applicable emergency exit doors (Ref. TASK 52-22-00-010-001).
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (a) Clean the door stop fittings with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
 4. Procedure
_________
 Subtask 53-41-00-210-101
 A. Inspection
 (Ref. Fig. 631/TASK 53-41-00-991-041)

 (1) Examine the door stop fittings for:
 -wear,
 -cracks.
 NOTE : If necessary refer to the ASRM (Ref. ASRM 53-46-11-101) for
____ the limits and the correct repair procedure.
 EFF : 301-399, 53-41-00Page A639

Nov 01/04
R
 CES

 Door Stop Fittings Figure 631/TASK 53-41-00-991-041
R  EFF : CES  301-399,  53-41-00 Page A640 Nov 01/04 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(20)