Detailed Visual Inspection of the Emergency-Exit Escape Chute Compartment Skin Cutouts, Upper and Lower Corners External Surface LH/RH
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 534177-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific adjustable platform 2.2 m (7 ft. 3 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
R  Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
ASRM 53-41-11-101 (for corrective action)

 3. Job Set-up
__________

 Subtask 53-41-00-010-129
 A. Get Access
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
 BEFORE YOU START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 (1) Put the adjustable platform in position below the emergency-exit escape chute.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
 4. Procedure
_________
 Subtask 53-41-00-210-098
 A. Inspection
 (1) Examine the skin cutouts at the upper and lower corners of the emergency-exit escape chute compartment cutouts for:
 -cracks,
 -corrosion.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
 the correct repair procedure.

 EFF : 301-399, 53-41-00Page A633

Nov 01/04
R
 CES  5. Close-up

________ Subtask 53-41-00-410-127
 A. Close Access
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 EFF : 301-399, 53-41-00Page A634

Nov 01/04
R
 CES  TASK 53-41-00-210-046

 Detailed Visual Inspection of the Skin at the Window Cutout between FR47 and FR47.2 from Stringer 14 to Stringer 18, External Surface LH/RH
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 534191-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific adjustable platform 3.2 m (10 ft. 6 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
R  Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
ASRM 53-41-11-101 (for corrective action) 3. Job Set-up

__________
 Subtask 53-41-00-010-130
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUSELAGE 機(jī)身3(19)