EFF : ALL
53-42-17Page 402

 **ON A/C ALL
 4. Procedure
_________ **ON A/C 001-049, 051-099, 101-101, 106-149, 221-221, 224-224, 228-228,
 (Ref. Fig. 401/TASK 53-42-17-991-001)
 **ON A/C 102-105,

 (Ref. Fig. 401A/TASK 53-42-17-991-001-A)
 **ON A/C 151-199,

 (Ref. Fig. 401B/TASK 53-42-17-991-001-C)
 **ON A/C 201-220, 222-223, 225-227, 229-299,

 (Ref. Fig. 401C/TASK 53-42-17-991-001-B)
 **ON A/C 301-399,

 (Ref. Fig. 401D/TASK 53-42-17-991-001-D) R **ON A/C 401-499,
R (Ref. Fig. 401E/TASK 53-42-17-991-001-E) **ON A/C 001-049, 051-099, 101-101, 106-149, 221-221, 224-224, 228-228,
 Subtask 53-42-17-020-051
 A. Removal of the Floor Panels:
 (1)
 Remove the screws (8) and (11), the washers (9) and (10) and the panel (12).

 (2)
 Find the end of the cord (4).

 EFF : ALL
53-42-17Page 403

 BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401/TASK 53-42-17-991-001 
R  EFF : 001-049, 051-099, 101-101, 106-149, 221-221, 224-224, 228-228,  53-42-17 Page 404 May 01/05
 CES 

 BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401A/TASK 53-42-17-991-001-A 
R  EFF :  102-105,  53-42-17 Page 405 May 01/05
 CES 

R R  BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401B/TASK 53-42-17-991-001-C 
R  EFF :  151-199,  53-42-17 Page 406 Feb 01/00
 CES 

 BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401C/TASK 53-42-17-991-001-B 
R  EFF :  201-220, 222-223, 225-227, 229-299,  53-42-17 Page 407 Feb 01/05
 CES 

R R  BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401D/TASK 53-42-17-991-001-D 
R  EFF :  301-399,  53-42-17 Page 408 May 01/04
 CES 

R R  BULK Cargo-Compartment Floor-Panels Zone 160 Figure 401E/TASK 53-42-17-991-001-E 
R  EFF :  401-499,  53-42-17 Page 409 Aug 01/05
 CES 

 (3)
 Pull the cord up to remove the sealant from between the floor panels (1).

 (4)
 Remove the sealant from between the cutouts and the tiedown positions with a nonmetal scraper.

 (5)
 Remove the screws (2).

 (6) Remove the floor panels (1) and the seals (3) and (7). **ON A/C 102-105,
 Subtask 53-42-17-020-051-A
 A. Removal of the Floor Panels:
 (1)
 Remove the screws (8) and (11), the washers (9) and (10) and the panel (12).

 (2)
 Find the end of the cord (4).

 (3)
 Pull the cord up to remove the sealant from between the floor panels (1).

 (4)
 Remove the sealant from between the cutouts and the tiedown positions with a nonmetal scraper.

 (5)
 Remove the screws (2).

 (6) Remove the floor panels (1) and the seals (3), (5), (6) and (7). **ON A/C 151-199, 301-399,
 Subtask 53-42-17-020-051-C
 A. Remove the Floor Panels:
 (1)
 Find the end of the cord (7).

 (2)
 Pull the cord up to remove the sealant from between the floor panels (1).

 (3)
 Remove the sealant from between the cutouts and the tiedown positions with a nonmetal scraper.

R  EFF : 001-049, 051-099, 101-149, 151-199, 53-42-17Page 410 221-221, 224-224, 228-228, 301-399, Aug 01/05
 CES  (4) Remove the screws (2).

 (5) Remove the floor panels (1) and the seals (3), (4), (5) and (6). R **ON A/C 201-220, 222-223, 225-227, 229-299, 401-499,
 Subtask 53-42-17-020-051-B
 A. Removal of the Floor Panels:
 (1)
 Find the end of the cord (7).

 (2)
 Pull the cord up to remove the sealant from between the floor panels (1).

 (3)
 Remove the sealant from between the cutouts and the tiedown positions with a nonmetal scraper.

 (4)
 Remove the screws (2).

 (5)
 Remove the floor panels (1) and the seals (3) and (6).

R  EFF : 151-199, 201-220, 222-223, 225-227, 53-42-17Page 411 229-299, 301-399, 401-499, Aug 01/05
 CES  **ON A/C ALL

 TASK 53-42-17-400-001
 Installation of the BULK Cargo-Compartment Floor-Panels
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(83)