R **ON A/C 151-199, 401-499,
 Subtask 53-41-00-210-105-A
 A. Inspection
 (1) Examine the lateral FR55A and FR59 that you can see at the AFT cargo door cutout for:
 -corrosion,
 -cracks
 -and any other damage.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-12-201) for
____
 the correct repair procedure.

 **ON A/C ALL
 Subtask 53-41-00-916-080
 B. Temporary Protection Procedure (only necessary for CPCP (Corrosion Prevention and Control Program) MPD Tasks 534160-01-1 and 534160-01-2)
 (1) Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-005A) or STORAGE PRESERVATION (Material No. 15-006) or equivalent to the inspection area as necessary.

 AFT Cargo Door Cutout - Lateral Figure 634/TASK 53-41-00-991-045 
R  EFF :  ALL  53-41-00 Page A661 Nov 01/04
 CES 

 5. Close-up
________

 Subtask 53-41-00-410-135
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the access platform(s).

 (3)
 Close the Aft cargo-compartment door (Ref. TASK 52-30-00-860-002).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R **ON A/C 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,

 TASK 53-41-00-210-804
 General Visual Inspection of Sealing Profile of Bulk Cargo Door Cutout at Upper Corners
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 534172-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint free cloth
 No specific access platform 3.0 m (9 ft. 10 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-005A  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R  EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page A663 224-224, 228-228, May 01/05
 CES  C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-006 Open the Bulk Cargo-Compartment Door 52-30-00-860-008 Close the Bulk Cargo-Compartment Door ASRM 53-41-11-101 (for corrective action) 53-41-00-991-046 Fig. 635
 3. Job Set-up
__________
 Subtask 53-41-00-010-138
 A. Get Access
 (1)
 Put the access platform adjacent to the BULK cargo compartment door.

 (2)
 Open the BULK cargo compartment door (Ref. TASK 52-30-00-860-006).

 Subtask 53-41-00-110-089
 B. Cleaning Procedure
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint free cloth.
R  EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page A664 224-224, 228-228, May 01/05
 CES  4. Procedure
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(26)