3.
 THE FORCE TO RETRACT THE EXTERNAL HANDLE MUST BE LESS THAN 20 POUNDS.

Latch Handle Adjustment
Figure 514

B65384
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-41-00
 ALL  ú ú B02A Page 522 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
FINAL MOVEMENT UP
INBOARD ROLLER CLEARANCE (ACROSS SERRATIONS)
ADJUSTMENT
LATCH FITTING (4 LOCATIONS)  LATCH ROLLER  DOOR FRAME EDGE OF THE 
SEE  A  (4 LOCATIONS) 
SEE  B 

INNER FASTENERS OUTER FASTENER (2 LOCATIONS)
FWD
OUTBD
INBD
FINAL
MOVEMENT
DOWN
ROLLER CLEARANCE ADJUSTMENT
LATCH FITTING LATCH ROLLER CLEARANCE ADJUSTMENT(MOVEMENT)
1. LATCH FITTINGS WITH A DOOR WARNING SWTCH:
A
REMOVE THE SWITCH COVER AND MOVE THE SWITCH
TO GET ACCESS TO THE BOTTOM OUTER FASTENER.
2.
 LOOSEN THE INNER AND OUTER FASTENERS.

3.
 MARK THE POSITION OF THE FITTING ASSEMBLY.

4.
 MOVE THE LATCH ASSEMBLY UP OR DOWN.

A. USE YOUR MARKS TO SEE HOW FAR YOU HAVE MOVED THE ASSEMBLY.
5.
 MOVE THE FITTING ACROSS THE SERRATIONS TO KEEP THE LATCH FITTING THE SAME DISTANCE FROM THE EDGE OF THE DOOR FRAME.

ROLLER NOTE:IF YOU DO THIS, YOUR WILL NOT CHANGE THE FLUSHNESS ACCIDENTLY.

6.
 MAKE SURE THE SERRATIONS FIT TOGETHER CORRECTLY.

7.
 TIGHTEN ALL THE FASTENERS TO SECURE THE LATCH FITTING IN THE NEW POSITION.

0.28
INCH CLEARANCE0.04
___________________ LATCH ROLLER
NECESSARY CONDITION:
EACH LATCH ROLLER MUST BE 0.04 TO 0.28 INCH (DOOR IS IN THE CLOSED
FROM THE BOTTOM OF THE LATCH FITTING.

AND LATCHED POSITION)
B
Latch Roller Clearance Adjustment Figure 515
B48269
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-41-00
 ALL  ú ú B02A Page 523 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
DOOR

STOP PIN ADJUSTMENT (EXAMPLE)
STOP PIN ADJUSTMENT
1.
 REMOVE THE LOCKSPRING.

STOP FITTING

2.
 TURN THE STOP PIN TO MOVE IT INBOARD  OR OUTBOARD UNTIL YOU GET THE CORRECT DISTANCE BETWEEN THE PIN AND THE PAD AS FOLLOWS:

 a. MOVE THE STOP PIN OUTBOARD UNTILLOCKSPRING
IT TOUCHES THE STOP PAD.
 b. MOVE THE STOP PIN INBOARD 1/2 A STOP PIN
TURN.
C. MOVE THE STOP PIN INBOARD UNTIL THE STOP PAD
NEAREST LOCKGROOVES ON THE STOP PIN
AND STOP PIN BUSHING ALIGN.

0.030
INCH3. INSTALL THE SPRINGLOCK.
0.015
STOP PIN CLEARANCENECESSARY CONDITION:
EACH STOP PIN MUST BE 0.015 TO 0.030 INCHFROM ITS STOP PAD.

A MINIMUM TRAVEL OF 0.007 INCH CAN BE ACHIEVED THROUGH VARIOUS COMBINATIONS OF LOCKING GROOVES BETWEEN THE STOP PIN AND STOP PIN BUSHING
Stop Pin Adjustment
Figure 516

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-41-00
 ALL  ú ú B02A Page 524 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
B48270
A

737-300/400/500
MAINTENANCE MANUAL

CENTERING GUIDE
TRACK
CENTERING GUIDE ADJUSTMENT
1.
 OPEN THE DOOR.

2.
 LOOSEN THE 3 BOLTS ON THE CENTERING GUIDE.

3.
 PUT THE CENTERING GUIDE IN THE CORRECT  POSITION ON THE SERRATED PLATE.

4.
 MAKE SURE THE SERRATIONS FIT TOGETHER CORRECTLY.

5.
 TIGHTEN THE BOLTS.

GUIDE (ON DOOR)
NECESSARY CONDITION:THE CENTERING GUIDE MUST BE THE CORRECT DISTANCE FROM THE GUIDE TRACK. TRACK CLEARANCE
Centering Guide Adjustment
Figure 517

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(132)