(2)  
The installation of the lining on the aft entry door.

 TASK 52-13-21-004-001-B00
 2.  Aft Entry Door Lining and Insulation Removal (Fig. 401)____________________________________________
 A. Special Tools and Equipment
 (1)  
Wrench - F70336-1

 B.
References

 (1)
25-61-35/201, Escape Slide Assembly (Door-Mounted)

 C.
Access

 (1)  
Location Zone
 110 Aft Entry Door

 D.
Procedure

 S 024-013-B00
 (1)  
Remove the escape slide assembly (4) from the door (AMM 25-61-35/201).

 S 034-003-B00

 (2)  
Remove the inside handle (3) from the door:

 (a)  
Put the door in the cocked position.

 (b)  
Remove the insert (19) from the inside handle (3).

 (c)  
Remove the cotter pins (6), nuts (7), and washers (8) from the inside handle (3).

 (d)  
Remove the inside handle (3) from the door.

 (e)  
Remove the screw (9) from the cover (10).

 (f)  
Move the cover (10) horizontally and remove it from the door panel (1).

 (g)  
Remove the foam filler (11).

 (h)  
Remove the screws (12) and washers (20) from the mount (21).

 (i)  
Remove the mount (21) from the door panel (1).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-21
 ALL  ú ú B02 Page 401 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
1. DOOR PANEL 
LINING AND  LINING 
INSULATION  SUPPORT 
2. WINDOW  5. ASSIST HANDLE 
DOOR 
SEE  B  STRUCTURE 
18. FASTENER 
(39 LOCATIONS) 
3. INSIDE  CEMENT 
HANDLE 
DOOR PANEL 
SEE  C  FASTENERS 
FOAM  17. SEAL 
SEE  A 
4. ESCAPE SLIDE 
ASSEMBLY  1. DOOR PANEL 

INBD FWD
SEE E
DOOR PANEL FASTENERS
FWD
A
13.
 OUTER COLLAR (2 LOCATIONS)

14.
 NUT (2 LOCATIONS)

15.
 INNER COLLAR (2 LOCATIONS)

16.
 BOLT (2 LOCATIONS)

1. DOOR PANEL
5. ASSIST HANDLE WRENCH
INBD
ASSIST HANDLE B
Aft Entry Door Panel Installation Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-21
 ALL  ú ú B01 Page 402 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
1. DOOR PANEL 20. WASHER
A
23. HUB
(4 LOCATIONS) SHIM
12. SCREW
(4 LOCATIONS)  3. INSIDE HANDLE
21. MOUNT
10. COVER
9. SCREW 27. SHIMS 7. NUT
(2 LOCATIONS)
LOCKWIRE  (2 LOCATIONS) 
INBD  SEE FWD  D  22. SCREW  (3 LOCATIONS )  11. FOAM FILLER  A  19. INSERT 
8. WASHER  (2 LOCATION6. COTTER PIN  S)  (2.54 mm) 0.10 INCH MINIMUM 

3. INSIDE
INSIDE HANDLE
HANDLE LOCKWIRE C
26. BOLT (3 LOCATIONS)
FORWARD RETAINER
AFT RETAINER
LOCKWIRE  SEE G
SEE G
D
23. HUB
10. COVER
A-A
RETAINER
24. NUT (5 LOCATIONS)
SEE F
24. NUT
E
25. WASHER 25. WASHER
FORWARD AND AFT RETAINER (EXAMPLE)
RETAINER (EXAMPLE)
G F
Aft Entry Door Panel Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-21
 ALL  ú ú B01 Page 403 ú Nov 12/00
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(80)