737-300/400/500MAINTENANCE MANUAL
1.
 TOP PANEL

2.
 ATTACH NUTS

TOP SEAL
3.
 DOOR

4.
 TRIM

10. WINDOW SEE A
5. ASSIST HANDLE
9. INSIDE HANDLE SEE D
SEE B
6. BOTTOM PANEL
5. ASSIST HANDLE
8. ESCAPE SLIDE
7. ATTACH NUTS BOTTOM SEAL
INSULATION BLANKET
1. TOP PANEL
LINING SUPPORT
11. TOP PANEL FASTENERS
4. TRIM
6. BOTTOM PANEL
12. BOTTOM PANEL FASTENERS
INSULATION BLANKET SEAL
TRIM
A
Forward Entry Door Lining and Insulation Installation Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-31
 ALL  ú ú B01 Page 402 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
13. LINING  A
25. SHIMS SHIM
FOAM FILLER
9. INSIDE HANDLE
SCREW
24. HUB 
NUT  LOCKWIRE 
17. INSERT 
SEE  C 
MOUNT 
A 
26. COVER 
WASHER  0.10 INCH 
COTTER PIN  MINIMUM (2.54 mm) 
FWD  INBD 
LOCKWIRE  9. INSIDE 
INSIDE HANDLE  HANDLE 
27. BOLT  B 
(3 LOCATIONS) 

LOCKWIRE
C

19.
 OUTER COLLAR

20.
 NUT

21.
 INNER COLLAR

6. LOWER PANEL 24. HUB
26. COVER
A-A
5. ASSIST
HANDLE22. BOLTS
WRENCH
FWD
INBD
ASSIST HANDLE D Forward Entry Door Lining and Insulation Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-31
 ALL  ú ú B01 Page 403 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 024-020-B00
 (4)  
Remove the inside handle (9):

 (a)  
Remove the insert (17) from the inside handle (9).

 (b)  
Remove the cotter pins, nuts, and washers from the inside handle (9).

 (c)  
Remove the inside handle (9).

 (d)  
Remove the screws from the cover (26).

 (e)  
Remove the cover (26) and the foam filler.

 (f)  
Remove the screws and washers from the mount.

 (g)  
Remove the mount.

 (h)  
Remove and discard the lockwire from the bolts (27) of the hub (24) at the three locations.

 (i)  
Remove the three bolts (27) and the hub (24).

 (j)  
Remove the shims (25).

 NOTE: Measure the thickness of the shims for installation
____
 later.

 S 024-006-B00
 (5)  
Remove the top panel from the door.

 (a)  
Remove the screws (2) at the top corners of the panel.

 (b)  
Loosen the remaining screws on the top edge of the panel

 (c)  
Loosen the fasteners (11) on the remaining edges of the panel.

 (d)  
Pull the top edge of the panel (1) up and inboard to release it from the trim (4).

 (e)  
Remove the panel from the door.

 S 024-007-B00
 (6)  
Remove the bottom panel (6) from the door (3).

 (a)  
Remove the screws (7) at the bottom corners of the panel (6).

 (b)  
Loosen the screws along the bottom edge of the panel.

 (c)  
Loosen the fasteners (12) on the remaining edges of the panel.

 (d)  
Pull the bottom edge of the panel (6) inboard and down to release it from the trim (4).

 (e)  
Remove the panel (6) from the door.

 NOTE: The window pane assembly (10) stays on the panel.
____
 S 034-008-B00
 (7)  Remove the trim (4) from the door (3).
 TASK 52-11-31-404-009-B00
 3. Forward Entry Door Lining Installation (Fig. 401)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(56)