曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

A 737-300/400/500MAINTENANCE MANUAL
 (3)  S 014-011-B00Install the part of the seal that goes around the edge of the door. (a) Push the inboard edge of the flange into the retainer. (b) Use the special tool to push the outboard flange into the retainer. (c) Make sure the part of the seal that goes around the edge of the door is smooth.
 (4)  S 394-012-B00Put the sealant on the part of the seal between the door and the gates. (a) Apply a layer of the sealant on the seal as shown. (b) Make the sealant smooth. (c) Let the sealant become dry. 1) The sealant will be dry after 24 hours if the temperature is 75 degrees F.
 NOTE:____ More time is necessary if the temperature is less than 75 degrees F.
 (5)  S 864-013-B00Connect the control rods to the gates.
 (6)  S 864-014-B00Close the door.
 (7)  S 714-015-B00See that the seal touches the edge of the door opening.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-14
 ALL  ú ú B01 Page 405 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 AERODYNAMIC SEALS - REMOVAL/INSTALLATION
________________________________________
 1.  General_______
 A.  Aerodynamic seals decrease aerodynamic drag. This procedure refers to the Aerodynamic Seals as "the seals". There are two alternatives to attach the seals:
 (1)
The seal is in a flange

 (2)
An angle holds the seal to the structure.

 B.  
This procedure contains two tasks:

 (1)
The removal of a seal

 (2)
The installation of a seal.

 TASK 52-09-15-004-001-B00
 2.  Aerodynamic Seal Removal (Fig. 401)________________________
 A.  Access
 (1)  
Location Zone
 202 Lower Nose Compartment
 212 Left Air Conditioning Equipment Bay
 214 Right Air Conditioning Equipment Bay
 701 Tail Compartment

 (2)  
Access Panels
 1103 Forward Access Door
 1601L Forward Airstair Door
 3304L A/C Access Door
 3404R A/C Access Door
 3303L A/C Access Panel
 3403R A/C Access Panel
 3701 Stabilizer Trim Access Door
 3804 APU Cowl Door

 B.  
Procedure

 S 024-002-B00
 (1)
Remove a seal that is in a flange.

 (a)
Hold the part of the seal that is not in the flange.

 (b)
Pull the seal out of the flange.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-15
 ALL  ú ú B01 Page 401 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
ANGLE

EXAMPLE INSTALLATIONS WITH A FLANGE

Aerodynamic Seal Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-15
 ALL  ú ú B01 Page 402 ú Jul 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 024-003-B00
 (2)  
Remove a seal that is attached with an angle.

 (a)  
Remove the screws that go through the angle and seal to the structure.

 (b)  
Remove the angle.

 (c)  
Remove the seal.

 TASK 52-09-15-404-004-B00
 3.  Aerodynamic Seal Installation_____________________________
 A. Special Tools and Equipment
 (1)  
Door Seal Installation Tool - SE52-1002

 B.
Consumable Materials

 (1)  
B00148 Solvent - Methyl Ethyl Ketone, TT-M-261

 C.
Access

 (1)  
Location Zone
 202 Lower Nose Compartment
 212 Left Air Conditioning Equipment Bay
 214 Right Air Conditioning Equipment Bay
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(22)