52-11-31
ALL ú ú B02 Page 404 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
B. References
(1)
AMM 25-61-35/201, Escape Slide Assembly (Door-Mounted)
C.
Consumable Materials
(1)
D00015 Grease - BMS 3-24
D.
Access
(1)
Location Zone
105 Forward Entry Door
E.
Procedure
S 424-017-B00
CAUTION: SURFACES YOU CAN SEE FROM THE CABIN MUST NOT HAVE SCRATCHES,
_______ MARKS, OR DENTS. BE CAREFUL WITH THE PARTS OF THIS INSTALLATION. IT IS EASY TO MAKE SCRATCHES OR MARKS ON THESE PARTS.
(1)
Install the trim (4) on the door (3).
S 424-011-B00
(2)
Install the bottom panel (6) on the door (3).
(a)
Put the top edge of the panel below the trim (4).
(b)
Tighten the fasteners (12) on the forward and the aft edges of the panel (6).
(c)
Install the screws (7) at the bottom corners of the panel (6).
(d)
Tighten the screws along the bottom edge of the panel.
S 424-012-B00
(3)
Install the top panel (1) on the door (3).
(a)
Put the bottom edge of the top panel below the trim (4).
(b)
Tighten the fasteners (11) on the forward and the aft edges of the panel.
(c)
Install the screws (2) in the top corners of the panel.
(d)
Tighten the screws in the top edge of the panel.
S 424-021-B00
(4)
Install the inside handle (9):
(a)
Install shims (25) between the lining and the hub (24) as necessary.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-11-31
ALL ú ú B02 Page 405 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b)
Apply grease, BMS 3-24, to both sides of the shims (25) as you install them.
(c)
Install the hub (24) and its bolts (27).
(d)
Apply grease, BMS 3-24, to the bolts (27).
(e)
Install the new lockwire as shown on the bolts (27).
(f)
Install the mount on the lining (13).
(g)
Install the foam filler.
(h)
Install the cover (26) on the lining (13).
(i)
Install the inside handle (9) on the hub (24) with the washers, nuts, and cotter pins.
(j)
Install the insert (17) on the inside handle (9).
(k)
Make sure that a minimum clearance of 0.10 inch (2.54 mm) is between the cover (26) and the inside handle (9). 1) If the clearance is less than 0.10 inch (2.54 mm), add
shims.
S 434-014-B00
(5)
Install the assist handle (5) on the door.
(a)
Install the bolts (22) , collars (19, 21) and nuts (20) on the bottom panel.
(b)
Put the assist handle on the nuts.
(c)
Use the special tool to tighten the nuts.
(6)
Install the escape slide assembly (AMM 25-61-35/201).
(7)
Close the door.
S 434-015-B00
S 864-016-B00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-11-31
ALL ú ú B02 Page 406 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
FORWARD ENTRY DOOR ASSIST SPRING - REMOVAL/INSTALLATION
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(57)
