曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 B.  Rotation of the control cam by rotation of exterior or interior handle
 will operate the door.Latching Crank and Cocking Crank Assemblies (Fig. 2)
___________________________________________
 A.  The control cam is a circular plate with one cam track on the inboard surface and two cam tracks on the outboard surface. The track on the inboard surface of the control cam programs the motion of the latching crank. The latching crank, connected by an intermediate torque tube, translation arm, pushrod, and latch torque tube crank, rotates the latch torque tube. The latch torque tube, supported by bearings at the door ribs and frames, extends forward and aft through the latch torque tube crank to the doorframes. Latch rollers, which engage with latch cams mounted on the doorjamb, are bolted to each end of the torque tube.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-00
 ALL  ú ú 01 Page 1 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INTERIOR HANDLE
CONTROL
BRACKET
CAM
INTERIOR
HANDLE
SEE A
HANDLE MECHANISM
RECESSED DOOR HANDLE HOUSING
MECHANISM HOUSING
HANDLE SHAFT
PUSHROD
COIL SPRING
SEAL
PUSHROD LINK (2 LOCATIONS)
PIVOT FITTING
EXTERIOR HANDLES
A
Crew Entry/Service Door Handle Mechanism
Figure 1

B41081
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-00
 ALL  ú ú 01 Page 2 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

LATCHING
COCKING
CRANK
CRANK
ASSEMBLY
ASSEMBLY
SEE A
SEE B
LATCH ROLLER
SUPPORT BEARING
LATCH TORQUE TUBE CRANK
LATCH TORQUE TUBE
TRANSLATION SERRATED
ARM PLATE
SPRING
FILLER PUSHROD
FRAME
LATCH CAM
SERRATED CONTROLPLATE CAM SUPPORTINTERIOR BRACKETSHANDLE
LATCHING CRANK
OUTBD
LATCHING CRANK ASSEMBLYA Latching and Cocking Crank Assemblies Figure 2 (Sheet 1)
B41082
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-00
 ALL  ú ú 01 Page 3 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

UPPER HINGE FITTING
UPPER PIVOT FITTING
DOOR SUPPORT BRACKETS 
CONTROL ROD 
UPPER COCKING CRANK 
CONTROL CAM 
LOWER COCKING CRANK 
INTERIOR HANDLE 
CONTROL ROD 
CONTROL ROD  TRANSLATION ARM 
LOWER INBOARD 
HINGE FITTING  OUTBOARD
HINGE FITTING 

COCKING CRANK ASSEMBLY
B

Latching and Cocking Crank Assemblies
Figure 2 (Sheet 2)

B41088
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-13-00
 ALL  ú ú 01 Page 4 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 B.  The two cam tracks on the outboard surface of the control cam program the motion of the upper and lower cocking cranks. The upper cocking crank is attached, by a control rod, to the outboard lug of the upper hinge fitting. The upper hinge fitting, attached to upper pivot fitting and door support brackets, functions as a pivot to rotate the door. The lower cocking crank is attached, by a control rod, to one clevis of the lower translation arm. From the other clevis of the lower translation arm, a control rod extends to the lower inboard hinge fitting. The lower inboard hinge fitting, which functions as a pivot link, allows the outboard hinge fitting to pivot on a bearing shaft located in the door structure. The combined motion of the inboard and outboard hinge fittings rotates the door lower edge.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(120)