52-13-00
ALL ú ú 01 Page 7 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(3)
The door is closed from inside the airplane by releasing hold-open latch securing the door in the stowed position and manually sliding the door forward along the carriage tracks until it contacts the forward door snubbers which releases the carriage latch. The door handle is then pulled out and rotated counterclockwise one-half turn. Initial rotation of the handle causes the control cam to operate the upper and lower hinge fitting linkages which moves the door outboard to the door closed position. The door is guided into the opening by the station programming cam and follower located at the lower forward portion of the door. Final rotation of the handle operates the door latching mechanism and returns the door handles to the flush position.
B.
Control
(1)
Open door from inside or outside of airplane as follows:
(a)
Pull interior handle inboard and rotate clockwise one-half turn or pull exterior handles from recess and rotate counterclockwise one-half turn.
(b)
Stow interior handle by pushing handle outboard or exterior handle by placing handles in door recess after door is positioned on carriage.
CAUTION: CHECK THAT EXTERIOR HANDLE IS STOWED BEFORE SLIDING DOOR
_______ AFT TO PREVENT POSSIBLE DAMAGE TO HANDLE.
(c)
Slide door aft to stowed and latched position.
(2)
Close door from inside or outside of airplane as follows:
(a)
Unlatch door by moving latch handle at aft end of upper rail forward and slide door forward against snubbers to release door carriage hook.
(b)
Pull interior handle inboard and rotate counterclockwise or pull exterior handles from recess and rotate clockwise to move door into doorway and latch closed.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-13-00
ALL ú ú 02 Page 8 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 FAULT ISOLATION/MAINT MANUAL
UPPER DECK CREW SERVICE DOOR
COMPONENT SHT 102 FIG. QTY ACCESS/AREA REFERENCE
CAM - PROGRAMMING DOOR - UPPER DECK HANDLE MECHANISM HINGE FITTING - BOTTOM HINGE FITTING - TOP TRACK - TOP TRACK - BOTTOM 5 1 7 4 2 6 6 1 1 1 1 1 1 1 BOTTOM PART OF UPPER DECK DOOR 847R, RIGHT UPPER DECK DOOR 847R, RIGHT UPPER DECK DOOR BOTTOM OF UPPER DECK DOOR TOP OF UPPER DECK DOOR BOTTOM OF UPPER DECK DOOR TOP OF UPPER DECK DOOR 52-13-01 52-13-01 52-13-01 52-13-01 52-13-01 52-13-01 52-13-01
Upper Deck Crew Service Door - Component Index
Figure 101
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-13-00
ALL ú ú 02 Page 101 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C08328
A
747-400 FAULT ISOLATION/MAINT MANUAL
TOP HINGE FITTING
SEE B
TOP TRACK
SEE F
LATCH ROLLER
AND LATCH
CAM FITTING
SEE A
HANDLE
MECHANISM
SEE H
STOP PIN AND STOP FITTING (10 LOCATIONS)
CONTROL ROD
SEE C
STATION PROGRAMMING 1. LATCH
CAM AND CARRIAGE ROLLER
LATCH
SEE E
BOTTOM HINGE
FIRM FITTING
CONTACT
FWD
SEE D BOTTOM TRACK FRAME
SEE G
2. LATCH CAM FITTINGINBD
LATCH CAM FITTING
A
Upper Deck Crew Service Door - Component Location Figure 102 (Sheet 1)
C08736
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-13-00
ALL ú ú 02 Page 102 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 FAULT ISOLATION/MAINT MANUAL
4. TOP CARRIAGE A
3. PIVOT FITTING TOP TRACK
FWD FITTING 5. TOP HINGE
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(122)
