(b)  
Have another person do a leakage check of the light from in the airplane.

 S 212-021
 (4)  
Do a check of the seal contact surface.

 (a)  
Open the door.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-02
 ALL  ú ú 03 Page 205 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (b)  
Apply a powder colored chalk on the pressure seal on the door.

 (c)  
Close and open the door.

 (d)  
Examine the seal depressor to determine what part of the pressure seal does not touch the seal depressor.

 (e)  
Make sure the pressure seal touches the seal depressor as shown in Detail A.

 S 392-022
 (5)  Apply EC 3587 Fairing Compound to the seal depressor as necessary to align the seal deflection necessary as shown in Detail A.
 NOTE: You must be careful when you apply the fairing compound and
____ prepare the sealing surface. The water and air leakage resistance of the door depends on the quality and workmanship of the surface the seal touches on.
 (a)  If more seal deflection is necessary, RTV 157 sealant can be applied locally to the seal.
 NOTE: Sealant thickness must not be more than 0.15 inch and
____ faired to a 20:1 ratio. The sealant must be made smooth so it will align with the adjacent surface.
 S 212-023
 (6)  
Make sure the surface of the applied fairing compound on the seal depressor is smooth.

 S 212-024

 (7)  
Make sure the radius (chamfer optional) of the forward upper corner seal depressor is per Detail B-B.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-02
 ALL  ú ú 03 Page 206 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 RAIN SEALS - REMOVAL/INSTALLATION
_________________________________
 1.  General
_______
 A.  This procedure contains two tasks. The first task is the removal of the rain seal. The second task is the installation of the rain seal.
 B.  The rain seals are installed on the forward and aft cargo doors. In the door closed position, the seals are installed inboard of the door hinge.
 TASK 52-09-03-004-001
 2.  Remove the Rain Seal (Fig. 401)
____________________
 A.  References
 (1)  
IPC 52-09-03 Fig. 1

 B.  
Access

 (1)  
Location Zones
 821R Forward Carge Door
 822R Aft Cargo Door

 C.  
Procedure

 S 824-002
 (1)
Put the door in a position to make the removal of the seal easy.

 S 024-018

 (2)  
If you remove the cargo door, do the two steps that follow to disconnect the seal.

 S 034-003

 (3)  
Remove the screws that hold the rain seal to the door (View B, Fig. 401).

 S 024-004

 (4)  
Pull on the seal to remove it from the door structure. Be careful when you pull the seal to not stretch or deform the seal or cause damage to the retainer.

 NOTE: The seal retainer is bonded to the seal and you will remove
____
 it with the seal.

 S 034-005
 (5)  Remove the screws that hold the rain seal to the fuselage structure (View A, Fig. 401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-09-03
 ALL  ú ú 01 Page 401 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
A
A
FWD OUTBD
SEAL TOP
ATTACHMENT

SEE A
RAIN SEAL
FORWARD OR AFT CARGO DOOR
SEAL DOOR ATTACHMENT
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 1(14)