曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

one or more of its inputs are at logic one. An EXCLUSIVE OR gate has a logic one on its output when one
and only one of its inputs is at logic one.
orifice. A hole. When the word orifice is used, the hole is considered to have special characteristics. The
orifice in a carburetor jet, for example, has a specific diameter, length, and approach and departure angles.
orifice check valve (fluid power system component). A special check valve used in a hydraulic or
pneumatic system, to allow full flow of fluid in one direction but a restricted flow in the opposite direction.
O-ring. A type of seal used in fluid-power system components. An O-ring is a ring-shaped seal with a
round cross section, made of a resilient material. An O-ring fits into a groove to form a seal between two
parts.
O-rings are two-way seals; they seal in either direction. They can be used as either packings
between moving parts or gaskets between parts having no relative motion.
ornithopter. A type of flying machine that has been proposed since the days of Leonardo daVinci (around
1500 AD), but has never been built in a practical form. An ornithopter is supposed to support itself in the
Printed from Summit Aviation's Computerized Aviation Reference Library, 2/7/2007
Page 420
air by moving the air with flapping wings.
orographic. A term pertaining to mountains or anything caused by mountains. Examples are orographic
clouds, orographic lift, and orographic precipitation.
oronasal oxygen mask. A type of oxygen mask that covers only the mouth and nose of the wearer. An
oronasal mask is distinguished from the full face mask, which covers the entire face as well as the eyes of
the person wearing it.
orthographic projection (graphics). A method of showing all the sides of an object by projecting straight
lines from the object to the drawing surface. An orthographic projection of a solid object requires six
separate views: top, bottom, right and left sides, front, and back.
oscillate. To swing back and forth. A pendulum is useful as a timing device because it oscillates with a
definite period, or length of time required for each cycle of oscillation.
oscillator (electronic circuit). An electronic circuit that converts direct current into alternating current.
The component values in an oscillator can be chosen to produce AC with any desired frequency and with
any desired waveform.
oscillograph. An electronic instrument that produces a permanent record of the values of electrical current
as it changes with time. Transducers produce electrical signals that relate to the mechanical movement
being measured. These signals are recorded on a time base in such a way that they produce a graphic record
of the way the mechanical movement changes with reference to time.
oscilloscope. An electrical measuring instrument that displays, on the face of a cathode-ray tube, the way
an electrical value changes with time. A high-velocity beam of electrons strikes a phosphorescent coating
on the inside of the cathode-ray tube face and produces a visible glow. The beam is swept from side to side
by a time-controlled oscillator and deflected up and down by the electrical value being measured.
osmium. A bluish-white, hard, metallic chemical element. Osmium’s symbol is Os, its atomic number is 76,
and its atomic weight is 190.2. Osmium is used as a hardener for platinum to increase its wearing ability.
Otto thermodynamic cycle. The constant-volume cycle of energy transformation used in a reciprocating
engine. Fuel and air are drawn into the cylinder as the piston moves to the bottom of its stroke. The fuel-air
mixture is then compressed as the piston moves upward in the cylinder, and when the piston is near the top
of its stroke, the mixture is ignited and burns. The burning mixture heats and expands the air inside the
cylinder and forces the piston down, performing useful work. The piston then moves back up, forcing the
burned gases out of the cylinder. The pressure inside the cylinder varies throughout the cycle, but all events
take place in the same location.
“Out” (air traffic control). A term used in air traffic control to indicate that the conversation is ended and
no response is expected.
outer area (air traffic control). Nonregulatory airspace surrounding designated Class C airspace airports
in which ATC provides radar vectoring and sequencing on a full-time basis for all IFR and participating
VFR aircraft. The normal radius is 20 nautical miles, with some variations based on site-specific
requirements. The outer area extends outward from the primary Class C airspace airport and extends from
the lower limits of radar/radio coverage up to the ceiling of the approach control’s delegated airspace,
excluding the Class C charted area and other airspace as appropriate.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空術(shù)語詞典Dictionary of Aeronautical Terms 中(157)