曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

WRITE a “FROM/TO” city pair, then ENTER it :
If one or more company routes run between the cities, the ROUTE SELECTION page appears
and defines them.
INSERT the preferred company route.
�� If the database does not contain a company route :
The flight plan will be constructed manually :
PRESS the INIT key.
ENTER a city pair in the FROM/TO field.
The ROUTE SELECTION page comes up with “NONE”.
SELECT RETURN [6L] key, then construct the flight plan manually.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-10 P 4/36
FCOM 19 AUG 10
If waypoints, navaids or airports are not in the nav database, the pilot must define and store
them manually, using the data “stored” function.
Applicable to: ,
GENERAL
Follow SOP instructions, when the route is a company route stored in the database.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-10 P 5/36
FCOM 19 AUG 10
�� If the company route is unknown, proceed as follows :
WRITE a “FROM/TO” city pair, then ENTER it :
If one or more company routes run between the cities, the ROUTE SELECTION page appears
and defines them.
INSERT the preferred company route.
�� If the database does not contain a company route :
The flight plan will be constructed manually :
PRESS the INIT key.
ENTER a city pair in the FROM/TO field.
The ROUTE SELECTION page comes up with “NONE”.
SELECT RETURN [6L] key, then construct the flight plan manually.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-10 P 6/36
FCOM 19 AUG 10
If waypoints, navaids or airports are not in the nav database, the pilot must define and store
them manually, using the data “stored” function.
Applicable to:
ALIGNING IRS
• The pilot can enter the latitude with N or S preceding or following the value (for example,
N4350.5 or 4350.5N), and the longitude with E or W preceding or following the value (for
example, E00364.5 or 364.5E, W11020.3 or 11020.3W).
Leading zeros may be omitted.
• If the airport reference point is modified after the completion of the alignment, the MCDU
displays the “RESET IRS TO NAV” message. During a stopover, it should be considered as a
reminder for a quick realignment.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-10 P 7/36
FCOM 19 AUG 10
�� If the “RESET IRS TO NAV” message comes up later :
‐ Check the latitude and longitude, shown on the INIT page, against the position of the IRSs
in NAV MODE on the IRS pages (accessed through the IRS MONITOR page).
If these positions differ, RESET the ADIRS CDU ‐ mode by switching the selector switches
OFF, and back to NAV within 5 s. (All three IRSs must be switched OFF, and then all three
switched to NAV.)
Applicable to: ,
ALIGNING IRS
• The pilot can enter the latitude with N or S preceding or following the value (for example,
N4350.5 or 4350.5N), and the longitude with E or W preceding or following the value (for
example, E00364.5 or 364.5E, W11020.3 or 11020.3W).
Leading zeros may be omitted.
• If the airport reference point is modified after the completion of the alignment, the MCDU
displays the “RESET IRS TO NAV” message. During a stopover, it should be considered as a
reminder for a quick realignment.
�� If the “RESET IRS TO NAV” message comes up later :
‐ Check the latitude and longitude, shown on the IRS INIT page, against the position of the
IRSs in NAV MODE on the IRS pages (accessed through the IRS MONITOR page).
‐ If these positions differ, RESET the ADIRS CDU mode by switching the selector switches
OFF, and back to NAV within 5 s. (All three IRSs must be switched OFF, and then all three
switched to NAV.)
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-10 P 8/36
FCOM 19 AUG 10
Applicable to: ALL
LATERAL FLIGHT PLAN
SELECTING A DEPARTURE
You may use the “←” or “→” keys to gain access to the listings of runways, SIDs, and
transitions.
Procedure
PRESS the F-PLN key on MCDU
SELECT the DEPARTURE prompt [1L] key
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 9(171)