曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(4) An installation of the inboard carriage for the inboard flap.
TASK 27-51-13-000-801
2. Inboard Flap Outboard Carriage Removal
(Figure 401)
A. General
(1) This task is applicable to the flap carriages at flap supports No. 3 and 6.
B. References
Reference Title
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-11-000-801 Inboard Trailing Edge Flap Removal (P/B 401)
C. Location Zones
Zone Area
542 Left Wing - Fairing Flap Support No. 3
553 Left Wing - Inboard Flap
642 Right Wing - Fairing Flap Support No. 6
653 Right Wing - Inboard Flap
D. Prepare for the Removal
SUBTASK 27-51-13-040-001
(1) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
SUBTASK 27-51-13-020-001
(2) Do this task: Inboard Trailing Edge Flap Removal, TASK 27-51-11-000-801.
E. Inboard Flap Outboard Carriage Removal
SUBTASK 27-51-13-010-001
(1) Remove the upper skin panel [3] from the main flap [1]:
(a) Remove the bolts [4] that attach the upper skin panel [3] to the main flap [1].
(b) Remove the upper skin panel [3].
SUBTASK 27-51-13-020-002
(2) Remove the carriage assembly [2] from the main flap [1]:
(a) Remove the nuts [15], washers [14], washers [13], bolts [12] and bolts [16] that attach the aft
end of the carriage assembly [2].
(b) Remove the nuts [11], washers [10] and bolts [9] from the forward end of the carriage
assembly [2].
(c) Remove the nuts [8], washers [7], bolts [5] and fillers [6] from the forward end of the
carriage assembly [2].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-13
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(d) Remove the carriage assembly [2] from the main flap [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-13
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Outboard Carriage Installation
Figure 401 (Sheet 1 of 2)/27-51-13-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-13
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Outboard Carriage Installation
Figure 401 (Sheet 2 of 2)/27-51-13-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-13
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-13-400-801
3. Inboard Flap Outboard Carriage Installation
(Figure 401)
A. General
(1) This task is applicable to the flap carriages at flap supports No. 3 and 6.
B. References
Reference Title
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-11-400-801 Inboard Trailing Edge Flap Installation (P/B 401)
C. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
C00528 Compound - Corrosion Preventive, Petroleum Hot
Application (Soft Film)
MIL-C-11796,
Class III
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
2 Carriage assembly 27-51-13-02-268 GUN 001-014, 101-108,
155-157, 201-999
27-51-13-02-270 GUN 001-014, 101-108,
155-157, 201-999
E. Location Zones
Zone Area
542 Left Wing - Fairing Flap Support No. 3
553 Left Wing - Inboard Flap
642 Right Wing - Fairing Flap Support No. 6
653 Right Wing - Inboard Flap
F. Inboard Flap Outboard Carriage Installation
SUBTASK 27-51-13-420-001
(1) Install the carriage assembly [2] on the main flap [1]:
(a) Make sure the upper panel [3] is removed from the main flap [1].
(b) Apply sealant, A00247 to the mating surface of the carriage assembly [2] and the main flap
[1].
(c) Put the carriage assembly [2] in its position on the main flap [1].
(d) Apply sealant, A00247 to the mating surface of the fillers [6] and the main flap [1].
(e) Put the fillers [6] in their location on the main flap [1].
(f) Apply sealant, A00247 to the shank and threads of the bolts [5], bolts [9], bolts [12] and bolts
[16].
(g) Install the bolts [5], washers [7] and nuts [8] to attach the forward end of the carriage
assembly [2] to the main flap [1].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(104)