曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Aft Flap Installation
Figure 401 (Sheet 2 of 5)/27-51-12-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Aft Flap Installation
Figure 401 (Sheet 3 of 5)/27-51-12-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 405
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Aft Flap Installation
Figure 401 (Sheet 4 of 5)/27-51-12-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Aft Flap Installation
Figure 401 (Sheet 5 of 5)/27-51-12-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 407
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-12-400-801
3. Inboard Aft Flap Installation
A. References
Reference Title
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-860-804 Retract the Trailing Edge Flaps (P/B 201)
27-51-16-400-801 Inboard Aft Flap Track Installation (P/B 401)
B. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
C00913 Compound - Nondrying Resin Mix Corrosion
Inhibiting Material
BMS3-27
C. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
2 Flap assembly 27-51-12-01-010 GUN 001-030, 101-122,
155-157, 201-999
27-51-12-01-015 GUN 001-030, 101-122,
155-157, 201-999
9 Pin 27-51-14-01-030 GUN 001-028, 101-121,
155-157, 201-999
19 Pin 27-51-14-02-010 GUN 001-028, 101-121,
155-157, 201-999
22 Pin 27-51-14-02-010 GUN 001-028, 101-121,
155-157, 201-999
D. Location Zones
Zone Area
553 Left Wing - Inboard Flap
653 Right Wing - Inboard Flap
E. Prepare for the Installation
SUBTASK 27-51-12-820-001
(1) If you will not install the same aft flap assembly [2] and main flap [1], make sure the inboard and
outboard rollers [28] are in the most forward position (Figure 401):
NOTE: With the rollers [28] in the most forward position, the slot in the eccentric bushing [29]
will align with the index mark on the retainer plate [30].
(a) Remove the nut [34], washer [35] and retainer plate [30] that hold the eccentric bushing
[29].
(b) Loosen the nut [33] on the roller [28].
(c) Turn the eccentric bushing [29] until the roller [28] is in the forward position and the slot
aligns with the bolt [36].
NOTE: The bolt [36] will stay in its position.
(d) Apply sealant, A00247 to the threads of the bolt [36].
(e) Install the retainer plate [30] with the washer [35] and nut [34].
(f) Tighten the nut [33] on the roller [28] to 95-110 pound-inches.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-12
Page 408
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-12-420-001
(2) Make sure the aft flap tracks are installed on the main flap [1] and are in the retracted position. If
they are not installed, do this task: Inboard Aft Flap Track Installation, TASK 27-51-16-400-801.
F. Inboard Aft Flap Installation
SUBTASK 27-51-12-420-002
(1) Install the aft flap assembly [2]:
(a) Hold the aft flap assembly [2] below and approximately perpendicular to the main flap [1].
(b) Engage the outboard roller [28] with the outboard programming track [38].
(c) Engage the inboard roller [28] with the inboard programming track [38].
(d) Lift the trailing edge of the aft flap assembly [2] and hold it in its usual position.
(e) Connect the aft flap assembly [2] to the aft flap tracks [21]:
1) Move the aft flap tracks [21] aft until they align with the aft flap assembly [2].
2) Install the bushings [25], bolts [27], washers [26], washers [24] and nuts [23] that attach
the aft flap tracks [21] to the aft flap assembly [2].
3) Tighten the nuts [23] to 100-150 pound-inches 11.3 to 16.9 newton-meters).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(98)