曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

1) Install a support to hold the ballscrew [42] when it is disconnected from the carriage
[52].
2) Remove the nuts [50], washers [49] and bolts [48] that attach the carriage bushings [51]
to the inboard carriage [52].
3) Remove the carriage bushings [51] from the carriage [52].
4) Move the gimbal [40] away from the carriage [52].
(c) Disconnect the outboard carriage [13] from the gimbal [16]:
1) Install a support to hold the ballscrew [17] when it is disconnected from the carriage
[13].
2) Remove the nuts [11], washers [10] and bolts [9] that attach the carriage bushing
assembly [15] and carriage bushing assembly [26] to the outboard carriage [13].
3) Remove the carriage bushing assembly [15] and carriage bushing [26] from the
carriage [13].
4) Move the gimbal [16] away from the carriage [13].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 403
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(d) Use the sling, SPL-1729 to move the inboard flap assembly [1] aft and down away from the
flap tracks.
CAUTION: BE VERY CAREFUL WHEN YOU LOWER THE FLAP TO THE GROUND. YOU CAN
CAUSE DAMAGE TO THE TRAILING EDGE OF THE FLAP.
(e) Use the sling, SPL-1729 to move the inboard flap assembly [1] outboard and aft away from
the airplane.
SUBTASK 27-51-11-210-004
(7) Do a check of the configuration of the inboard flap carriage roller cartridges, and inboard seals:
(a) Do a check of the position of the index marks [120] for the carriage roller cartridges on the
inboard and outboard carriages.
NOTE: Make a record of the position to use during the installation.
GUN 155; AIRPLANES WITH SMALL BULLNOSE SEALS
(b) Do a check for undersize seals on the inboard end of the flap assembly [1].
NOTE: If undersize seals are installed on the inboard end of the flap, make a record to be
used during the installation.
GUN 001-099, 101-122, 156, 157, 201-999; AIRPLANES WITH LARGE BULLNOSE SEALS
(c) If you will install a different flap, remove and keep the shim and bullnose seal for the
installation.
GUN ALL
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 404
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 1 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 2 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 3 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 407
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 4 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 408
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 5 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 409
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Trailing Edge Flap Installation
Figure 401 (Sheet 6 of 6)/27-51-11-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 410
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Inboard Flap Sling
Figure 402/27-51-11-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-11
Page 411
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-11-400-801
3. Inboard Trailing Edge Flap Installation
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(85)