曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-18
Page 409
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
2) Remove the bolt [63], washer [64], washer [65], washer [66] and washer [56].
NOTE: Make a note of the quantity, thickness and location of the washer [56], washer
[65] and washer [66].
3) Remove the bushing [61] and bushing [62] from the aft fairing assembly [2].
(c) Disconnect the drive rod assembly [34] and adjust link [35] from the attach beam
assembly [42]:
1) Remove the nut [73] and washer [72] from the bolt [67].
2) Remove the bolt [67], washer [68], washer [70], bushing [69] and bushing [71].
(d) Remove the nut [48], washer [47], washer [45], bolt [44] and bushing [46] that attach the
adjust rod assembly [43] to the adjust link [35].
------------------------- END OF TASK ---------------------------
TASK 27-51-18-400-802
5. Inboard Flap Support Aft Fairing Installation
(Figure 401)
A. General
(1) This task is applicable to the aft fairing on the No. 3 and No. 6 flap supports.
B. References
Reference Title
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-18-820-801 Inboard Flap Support Fairing Adjustment (P/B 501)
C. Consumable Materials
Reference Description Specification
A02315 Sealant - Low Density, Synthetic Rubber. 2 Part BMS5-142
D00013 Grease - Aircraft And Instrument Grease MIL-PRF-23827
(NATO G-354)
(Supersedes
MIL-G-23827)
D00633 Grease - Aircraft General Purpose BMS3-33
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
2 Fairing assembly 27-51-18-01-420 GUN 001-020, 101-110,
115, 116, 118, 155-157,
201-999
27-51-18-01-425 GUN 001-020, 101-110,
115, 116, 118, 155-157,
201-999
26 Tailcone assembly 27-51-18-01-430 GUN 001-024, 101-116,
118, 155-157, 201-999
32 Pin 27-51-18-01-187 GUN 001-028, 101-120,
155-157, 201-999
34 Rod assembly 27-51-18-01-300 GUN 001-028, 101-120,
155-157, 201-999
35 Link 27-51-18-01-410 GUN 001-028, 101-120,
155-157, 201-999
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-18
Page 410
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(Continued)
AMM Item Description AIPC Reference AIPC Effectivity
41 Pin 27-51-18-01-187 GUN 001-028, 101-120,
155-157, 201-999
42 Beam assembly 27-51-18-01-335 GUN 001-028, 101-120,
155-157, 201-999
43 Rod assembly 27-51-18-01-157 GUN 001-028, 101-120,
155-157, 201-999
49 Pin 27-51-18-01-130 GUN 001-028, 101-120,
155-157, 201-999
55 Pin 27-51-18-01-187 GUN 001-028, 101-120,
155-157, 201-999
60 Pin 27-51-18-01-187 GUN 001-028, 101-120,
155-157, 201-999
74 Pin 27-51-18-01-187 GUN 001-028, 101-120,
155-157, 201-999
E. Location Zones
Zone Area
542 Left Wing - Fairing Flap Support No. 3
642 Right Wing - Fairing Flap Support No. 6
F. Access Panels
Number Name/Location
542CL Flap Support No. 3, Access Cover
542CR Flap Support No. 3, Access Cover
642CL Flap Support No. 6, Access Cover
642CR Flap Support No. 6, Access Cover
G. Inboard Flap Support Fairing Installation
SUBTASK 27-51-18-020-005
(1) If the fairing drive linkage is not installed on the aft fairing assembly [2], do these steps:
NOTE: The fairing drive linkage includes the drive rod assembly [34], adjust link [35], adjust
rod assembly [43] and the attach beam assembly [42].
(a) Connect the adjust rod assembly [43] to the adjust link [35]:
1) Install the bushing [46], bolt [44], washer [45], washer [47] and nut [48] that attach the
adjust rod [46] to the adjust link [35].
NOTE: For the left wing, install the bolt [44] with the head on the same side of the
adjust link [35] as the bushing [46]. For the right wing, install the bolt [44] with
the head on the opposite side of the adjust link [35] as the bushing [46].
2) Install the pin [49] in the nut [48].
(b) Connect the drive rod assembly [34] and adjust link [35] to the attach beam assembly [42]:
1) Put the adjust link [35] in its location on the attach beam assembly [42] with the bushing
[69] and bushing [71].
2) Put the drive rod assembly [34] in its position on the attach beam assembly [42].
3) Install the bolt [67], washer [68], washer [70], washer [72] and nut [73].
4) Tighten the nut [73]:
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-18
Page 411
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊4(125)