曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-51-63-010-003
(2) To gain access to the Electronic Equipment Center, do this step:
Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
SUBTASK 27-51-63-860-013
WARNING: KEEP PERSONS AND EQUIPMENT CLEAR OF THE FLIGHT CONTROL SURFACES, THE
THRUST REVERSERS, AND THE LANDING GEAR. THESE COMPONENTS CAN MOVE
SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(3) Supply system B hydraulic power, do this task: Hydraulic System A or B Pressurization,
TASK 29-11-00-860-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-63
Page 511
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-63-860-014
WARNING: MAKE SURE PERSONS AND EQUIPMENT ARE AWAY FROM THE TRAILING EDGE
FLAPS AND THE LEADING EDGE FLAPS AND SLATS. THE FLAPS AND SLATS WILL
MOVE. THIS CAN CAUSE INJURIES TO PERSON AND DAMAGE TO EQUIPMENT.
(4) Move the flap control lever to the 1-unit position. Wait for the flaps and slats to move to the 1-unit
position.
SUBTASK 27-51-63-710-001
(5) Move the ALTERNATE FLAPS ARM switch to the ARM position.
SUBTASK 27-51-63-710-004
(6) Move the ALTERNATE FLAPS control switch to the UP position and hold it until the trailing edge
flaps stop moving.
SUBTASK 27-51-63-740-001
(7) Use the FSEU to do a check of the position of the trailing edge flaps:
(a) Push the ON/OFF button on the front panel of the FSEU to turn the display on.
NOTE: The display will show EXISTING FAULTS?.
(b) Push the down arrow until OTHER FUNCTNS? shows on the display.
(c) Push the YES button to select OTHER FUNCTNS? on the FSEU.
(d) Push the down arrow until I/O MONITOR? shows on the display.
(e) Push the YES button to select I/O MONITOR? from the menu.
(f) Push the down arrow until SYNCRO INPUTS? shows on the display.
(g) Push the YES button to select SYNCHRO INPUTS? from the menu.
(h) Push the down arrow to find the L FL POS and R FL POS indications on the menu.
(i) Make sure that the L FL POS and R FL POS indications are in the limit of -1.2 to 4.7.
(j) Push the ON/OFF button on the front panel of the FSEU to turn the front panel display off.
SUBTASK 27-51-63-860-017
(8) Move the flap control lever to the UP position to agree with the position of the flaps.
SUBTASK 27-51-63-710-005
(9) Move the ALTERNATE FLAPS ARM switch to the OFF position.
SUBTASK 27-51-63-720-002
(10) Align the air data inertial reference system. To do this, do this task: Air Data Inertial Reference
System - Alignment from the ISDU, TASK 34-21-00-820-802 or Air Data Inertial Reference
System - Alignment from the FMC CDU, TASK 34-21-00-820-801orAir Data Inertial Reference
System - Alignment from the ISDU, TASK 34-21-00-820-802 or Air Data Inertial Reference
System - Alignment from the FMC CDU, TASK 34-21-00-820-801.
(a) Do a test of the stall management yaw damper (SMYD) function of the S245 flap limit switch.
(b) Push the ON/OFF button on the SMYD 1 and 2 BITE panel to turn on the BITE display.
(c) Make sure the SMYD BITE display shows ‘‘EXISTING FAULTS?’’.
(d) Push the down arrow button to the selection ‘‘GROUND TESTS?’’
(e) Push the YES button.
(f) Push the down arrow button to the selection ‘‘DISCRETE INPUTS?’’.
(g) Push the YES button.
(h) Push the down arrow button as necessary until the display shows ‘‘FLAP UP = UP’’.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-63
Page 512
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
WARNING: MAKE SURE THAT PERSONNEL AND EQUIPMENT STAY AWAY FROM THE
LEADING EDGE FLAPS AND SLATS, TRAILING EDGE FLAPS, AND DRIVE
MECHANISMS. THE FLAPS, SLATS, AND DRIVE MECHANISMS MOVE QUICKLY.
THIS CAN CAUSE INJURIES TO PERSONNEL AND DAMAGE TO EQUIPMENT.
(i) Move the flap control lever to the 1-unit position. Wait for the flaps and slats to move to the
1-unit position.
(j) Make sure the SMYD BITE display shows ‘‘FLAP UP = NOT UP’’.
WARNING: MAKE SURE THAT PERSONNEL AND EQUIPMENT STAY AWAY FROM THE
LEADING EDGE FLAPS AND SLATS, TRAILING EDGE FLAPS, AND DRIVE
MECHANISMS. THE FLAPS, SLATS, AND DRIVE MECHANISMS MOVE QUICKLY.
THIS CAN CAUSE INJURIES TO PERSONNEL AND DAMAGE TO EQUIPMENT.
(k) Move the flap control lever to the UP position.
(l) Make sure the SMYD BITE display shows ‘‘FLAP UP = UP’’.
(m) Push the ON/OFF button on the SMYD 1 and 2 BITE panel to turn off the BITE display.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(110)