曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

A 8 C00211 FLIGHT CONTROL FSEU DC 1
A 9 C01468 FLIGHT CONTROL FSEU DC 2
SUBTASK 27-58-01-860-017
WARNING: MOVE ALL PERSONS AND EQUIPMENT AWAY FROM THE TRAILING EDGE FLAPS,
AND THE LEADING EDGE FLAPS AND SLATS. THESE SURFACES WILL MOVE AND
CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(8) Move the ALTERNATE FLAPS ARM switch to the OFF position to disarm the alternate control
system.
SUBTASK 27-58-01-020-003
(9) Remove the flap position transmitter from the airplane. To remove the transmitter, do this task:
Flap Position Transmitter Removal, TASK 27-58-01-000-801.
NOTE: Do not move the flaps to the extended position to remove the position transmitter. Be
careful not to move the shaft on the position transmitter when you remove it.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-58-01
Page 503
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-58-01-860-018
WARNING: KEEP PERSONS AND EQUIPMENT CLEAR OF THE FLIGHT CONTROL SURFACES, THE
THRUST REVERSERS, AND THE LANDING GEAR. THESE COMPONENTS CAN MOVE
SUDDENLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO EQUIPMENT.
(10) Supply system B hydraulic power, do this task: Hydraulic System A or B Pressurization,
TASK 29-11-00-860-801.
NOTE: You can use the ACMP to pressurize the hydraulic system.
SUBTASK 27-58-01-860-019
(11) Move the flap control lever to the 15-unit position to move the trailing edge flaps.
(a) Wait for the trailing edge flaps to move to the 15 unit position.
SUBTASK 27-58-01-860-020
(12) Remove system B hydraulic power, do this task: Hydraulic System A or B Power Removal,
TASK 29-11-00-860-805.
SUBTASK 27-58-01-860-021
(13) Remove the safety tags and close these circuit breakers:
F/O Electrical System Panel, P6-2
Row Col Number Name
A 8 C00211 FLIGHT CONTROL FSEU DC 1
A 9 C01468 FLIGHT CONTROL FSEU DC 2
SUBTASK 27-58-01-420-004
(14) Install the flap position transmitter. To install the flap position transmitter, do this task: Flap
Position Transmitter Installation, TASK 27-58-01-400-801.
NOTE: Do not move the flaps to the extended position to install the position transmitter. Be
careful not to move the shaft on the position transmitter more than necessary when you
install it.
G. Put the Airplane Back to Its Usual Condition
SUBTASK 27-58-01-010-002
(1) To get access to the main equipment center, do this step.
Close this access panel:
Number Name/Location
117A Electronic Equipment Access Door
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-58-01
Page 504
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Trailing Edge Flap System Controls
Figure 501 (Sheet 1 of 3)/27-58-01-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-58-01
Page 505
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Trailing Edge Flap System Controls
Figure 501 (Sheet 2 of 3)/27-58-01-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-58-01
Page 506
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Trailing Edge Flap System Controls
Figure 501 (Sheet 3 of 3)/27-58-01-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-58-01
Page 507
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
FLAP POSITION INDICATOR - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the flap position indicator
(2) An installation of the flap position indicator.
TASK 27-58-02-000-801
2. Flap Position Indicator Removal
(Figure 401)
A. Location Zones
Zone Area
211 Flight Compartment - Left
212 Flight Compartment - Right
B. Procedure
SUBTASK 27-58-02-860-001
(1) Open these circuit breakers and install safety tags:
F/O Electrical System Panel, P6-2
Row Col Number Name
A 11 C01443 FC TE FLAP POS/SKEW SNSR & IND RIGHT
A 12 C00213 FC TE FLAP POS/SKEW SNSR & IND LEFT
SUBTASK 27-58-02-020-001
(2) Remove the flap position indicator [1] from the panel:
(a) Turn the adjustment screw [4] to loosen the clamp [3].
(b) Remove the flap position indicator [1] from the panel.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機(jī)維護(hù)手冊5 AIRCRAFT MAINTENANCE MANUA(123)