曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(b) Apply compound, C00913 to the mating surface of the manual drive cover [5] and the power
drive unit [21].
(c) Apply compound, C00913 to the shank and threads of the bolts [29].
(d) Put the manual drive cover [5] and the packing [30] on the power drive unit [21].
(e) Install the bolts [29] and washers [28] to attach the manual drive cover [5].
SUBTASK 27-51-51-440-002
(6) Do this task: Trailing Edge Flap System Reactivation, TASK 27-51-00-440-801.
------------------------- END OF TASK ---------------------------
TASK 27-51-51-000-803
5. Flap Power Drive Unit (PDU) Seal Removal
(Figure 402)
A. General
(1) This procedure is applicable to the seals on the power drive unit (PDU) at the attachment of the
hydraulic motor, and the electric motor.
B. References
Reference Title
27-51-00-040-801 Trailing Edge Flap System Deactivation (P/B 201)
27-51-52-000-801 Flap Hydraulic Motor Removal (P/B 401)
27-51-53-000-801 Flap Electric Motor Removal (P/B 401)
29-09-00-860-802 Hydraulic Reservoirs Depressurization (P/B 201)
29-11-01-860-802 Hydraulic Reservoirs Depressurization (P/B 201)
32-00-01-480-801 Landing Gear Downlock Pins Installation (P/B 201)
C. Tools/Equipment
Reference Description
STD-203 Container - Oil Resistant, 1 U.S.-Gal (3.8 l)
D. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
E. Prepare for the Removal
SUBTASK 27-51-51-480-004
WARNING: MAKE SURE THE DOWNLOCK PINS ARE INSTALLED ON ALL THE LANDING GEAR.
WITHOUT THE DOWNLOCK PINS, THE LANDING GEAR CAN RETRACT AND CAUSE
INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) If the downlock pins are not installed in the nose and main landing gear, do this task: Landing
Gear Downlock Pins Installation, TASK 32-00-01-480-801.
SUBTASK 27-51-51-040-003
(2) Do this task: Trailing Edge Flap System Deactivation, TASK 27-51-00-040-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-51
Page 414
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-51-51-860-013
(3) Remove the pressure from the system B hydraulic reservoir. To remove the pressure, do this
task: Hydraulic Reservoirs Depressurization, TASK 29-11-01-860-802 or Hydraulic
Reservoirs Depressurization, TASK 29-09-00-860-802.
F. Seal Removal
SUBTASK 27-51-51-010-004
(1) To replace the seal [53] for the hydraulic motor [23], remove the hydraulic motor [22] from the
power drive unit [21]. To remove it, do this task: Flap Hydraulic Motor Removal,
TASK 27-51-52-000-801.
SUBTASK 27-51-51-010-005
(2) To replace the seal [53] for the electric motor [19], remove the electric motor [19] from the power
drive unit [21]. To remove it, do this task: Flap Electric Motor Removal, TASK 27-51-53-000-801.
SUBTASK 27-51-51-680-001
(3) Drain the fluid from the power drive unit [21]:
(a) Put a 1 U.S.-gal (3.81 l) oil resistant container, STD-203 below the drain port to catch the
fluid.
(b) Remove the plug [51] and the packing [52] from the drain port.
(c) Wait for the fluid to drain from the power drive unit [21].
SUBTASK 27-51-51-020-009
(4) Remove the seal [53] from the power drive unit [21]:
(a) Remove the screws [55] and the retainer [54] from the power drive unit [21].
CAUTION: USE CAUTION WHEN YOU REMOVE THE SEAL FROM THE POWER DRIVE UNIT.
YOU CAN SCRATCH THE PINION GEAR SHAFT, OR THE PDU HOUSING.
SCRATCHES, OR OTHER DAMAGE CAN CAUSE FLUID LEAKS PAST THE NEW
SEAL.
(b) Carefully remove the seal [53] from the power drive unit [21].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-51
Page 415
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flap Power Drive Unit Seal Installation
Figure 402 (Sheet 1 of 2)/27-51-51-990-804
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-51
Page 416
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Flap Power Drive Unit Seal Installation
Figure 402 (Sheet 2 of 2)/27-51-51-990-804
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-51
Page 417
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(77)