曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

assembly [1]:
(a) Remove the bolts [34] that attach the leading edge skin panel [33].
(b) Remove the leading edge skin panel [33] from the main flap [2].
SUBTASK 27-51-23-020-004
(5) Remove the nut [7], washer [6], washer [5] and bolt [4] that attach the failsafe link [15] to the
carriage assembly [1].
(a) Move the failsafe link [15] away from the carriage assembly [1].
SUBTASK 27-51-23-020-005
(6) Remove the carriage assembly [1] from the main flap [2]:
(a) Remove the nut [52], washer [51], bushing [50], washer [49] and bolt [48] that attach the aft
link assembly [35] to the aft link fitting assembly [47].
(b) Remove the nut [36] and washer [37] that attach the aft link assembly [35] to the main flap
[2].
(c) Remove the aft link assembly [35] from the aft link fitting assembly [47] and the main flap
[2].
(d) Remove the nut [30] and washer [31] that attach the forward end of the carriage
assembly [1] to the main flap [2].
(e) Move the carriage assembly [1] forward, away from the main flap [2].
SUBTASK 27-51-23-020-006
(7) If it is necessary, remove the nut [42], washer [43] and washer [44] that attach the failsafe link [15]
to the main flap [2].
SUBTASK 27-51-23-020-007
(8) If it is necessary, remove the aft link fitting assembly [47] from the carriage assembly [1]:
(a) Remove the nuts [41], washers [40] and bolts [39] that attach the aft link fitting assembly [47]
to the carriage assembly [1].
(b) Measure and record the thickness of the shims [46].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Outboard Carriage Installation
Figure 401 (Sheet 1 of 4)/27-51-23-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Outboard Carriage Installation
Figure 401 (Sheet 2 of 4)/27-51-23-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Outboard Carriage Installation
Figure 401 (Sheet 3 of 4)/27-51-23-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Outboard Flap Outboard Carriage Installation
Figure 401 (Sheet 4 of 4)/27-51-23-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-23
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-23-400-801
3. Outboard Flap Outboard Carriage Installation
(Figure 401)
A. General
(1) This task is applicable to the flap carriages at flap supports No. 1 and 8.
B. References
Reference Title
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-21-400-801 Outboard Trailing Edge Flap Installation (P/B 401)
C. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
C00528 Compound - Corrosion Preventive, Petroleum Hot
Application (Soft Film)
MIL-C-11796,
Class III
C00913 Compound - Nondrying Resin Mix Corrosion
Inhibiting Material
BMS3-27
D00633 Grease - Aircraft General Purpose BMS3-33
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
1 Carriage assembly Not Specified
8 Pin Not Specified
14 Pin Not Specified
15 Link Not Specified
17 Rubcap Not Specified
19 Bellcrank assembly Not Specified
25 Pin Not Specified
32 Pin Not Specified
35 Link assembly Not Specified
38 Pin Not Specified
45 Pin Not Specified
47 Fitting assembly Not Specified
53 Pin Not Specified
E. Location Zones
Zone Area
544 Left Wing - Fairing Flap Support No. 1
567 Left Wing - Outboard Flap
644 Right Wing - Fairing Flap Support No. 8
667 Right Wing - Outboard Flap
F. Outboard Flap Outboard Carriage Installation
SUBTASK 27-51-23-020-008
(1) If it is installed, remove the aft link assembly [35] from the carriage assembly [1].
(a) Remove the nut [52], washer [51], bushing [50], washer [49] and bolt [48] that attach the aft
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護(hù)手冊5 AIRCRAFT MAINTENANCE MANUA(5)