曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-55
Page 402
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Tee Angle Gearbox Installation
Figure 401 (Sheet 1 of 2)/27-51-55-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-55
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Tee Angle Gearbox Installation
Figure 401 (Sheet 2 of 2)/27-51-55-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-55
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-51-55-400-801
3. Tee Angle Gearbox Installation
(Figure 401)
A. References
Reference Title
12-22-51-640-801 Trailing Edge Flap Torque Tube and Torque Tube Support
Lubrication (P/B 301)
12-22-51-640-806 U-Joint and Tee Angle Gearbox Lubrication (P/B 301)
24-22-00-860-811 Supply Electrical Power (P/B 201)
27-51-00-440-801 Trailing Edge Flap System Reactivation (P/B 201)
27-51-00-820-802 Trailing Edge Flap Drive System Adjustment (P/B 501)
27-51-00-860-801 Trailing Edge Flap System Operation With Primary Control (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1726 Clamp Set - Trailing Edge Flap Torque Tube
(Part #: C27022-1, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
C00913 Compound - Nondrying Resin Mix Corrosion
Inhibiting Material
BMS3-27
D00633 Grease - Aircraft General Purpose BMS3-33
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
1 Gearbox assembly 27-51-55-01-020 GUN 155
27-51-55-01-023 GUN 155
8 U joint assembly 27-51-24-04-010 GUN ALL
E. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
F. Tee Angle Gearbox Installation
SUBTASK 27-51-55-420-001
(1) Install the tee angle gearbox assembly [1]:
(a) Apply compound, C00913 to the shank and threads of the bolts [4].
(b) Put the tee angle gearbox assembly [1] in its position on the structure.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-51-55
Page 405
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(c) Install the bolts [4], washers [5], washers [6] and nuts [7] to attach the tee angle gearbox
assembly [1].
SUBTASK 27-51-55-420-002
(2) Install the u joint assembly [8]:
(a) Put the u joint assembly [8] in its position between the transmission [9] and the tee angle
gearbox assembly [1].
(b) Install the bolts [10], washers [11] and nuts [12] that attach the u joint assembly [8] to the
transmission [9] and the tee angle gearbox assembly [1].
GUN 001-099, 101-110, 115, 116, 118, 156, 157, 203-999
(c) Install the wire bundle on the bracket on the tee angle gearbox assy [1].
GUN ALL
SUBTASK 27-51-55-420-003
(3) Connect the torque tubes [13] to the tee angle gearbox assembly [1]:
(a) Apply grease, D00633 to the coupling sleeves [2].
(b) Put the splined couplings [14] in the coupling sleeves [2].
(c) Install the screws [3] to attach the torque tubes [13] to the tee angle gearbox assembly [1].
(d) Install lockwire on the screws [3].
(e) Remove the clamp set, SPL-1726 from the torque tube [13] outboard of the tee angle
gearbox assembly [1].
SUBTASK 27-51-55-820-001
(4) If the torque tubes [13] moved, while they were disconnected, do this task: Trailing Edge Flap
Drive System Adjustment, TASK 27-51-00-820-802.
SUBTASK 27-51-55-640-001
(5) Lubricate the torque tubes [13], u joint assembly [8] and tee angle gearbox assembly [1]:
(a) To lubricate the torque tubes [13], do this task: Trailing Edge Flap Torque Tube and
Torque Tube Support Lubrication, TASK 12-22-51-640-801.
(b) To lubricate the u joint assembly [8] and the tee angle gearbox assembly [1], do this task:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊5 AIRCRAFT MAINTENANCE MANUA(85)